As a full professional quality system StrataDome offers a wide choice of different thickness Spacer Leveller Screw Clips for fitting under the Tile Sides, to suit individual job requirements. In addition, unlike many other similar systems, Screw Clips are also available for Cross Spacing and T-Spacing. The use of spacer leveller screw clips in the cross joints greatly improves the accuracy of installations ensuring perfect alignment of joints and grout lines. Note: Using spacer screws in the cross joints, compared to using two spacer screws under each of the tile sides, reduces the use of these consumables by around half - easier to work with also when using the system with smaller tile sizes.

Achieve perfect levels (no lippage), perfect tile spacing and perfect joint alignment

StrataRise  ... the professional's choice!

Installation

Threaded spacer/leveller clips are inserted underneath the tile edges or at joint intersections, into the bed of adhesive, before the adjacent tiles are positioned.

Once the tiles are laid and levelled, leave until the tile adhesive is dry. The Cylinder Domes and Spacer/Leveller Screws can then be easily removed by giving the domes a sharp tap with a rubber headed mallet, or by a kick, ideally in a parallel direction to the tile edge. This will cause the screw to break off at a level with the tile base leaving the joints clear and ready for grouting. The used leveller screws can be removed from the Domes and anti-scratch cups which can then be saved for re-use.